Mazda 2: Turbocharger Information (SKYACTIV-D 1.5)
CAUTION
- After driving at freeway speeds or up a long hill, idle the
engine at least 30 seconds
before stopping it. Otherwise, the turbocharger could be damaged. However,
when
i-stop operates, idling is unnecessary.
- Racing or over-revving the engine, particularly after it's just
been started, can damage
the turbocharger.
- To protect the engine from damage, the engine is designed so
that it cannot be raced
just after starting it in extremely cold weather.
The turbocharger greatly enhances engine power. Its advanced design provides
improved
operation and requires minimum maintenance.
To get the most from it, observe the following.
- Change engine oil and fi lter according to Scheduled Maintenance (page
6-3 ).
- Use only recommended engine oil (page 6-23 ). Extra additives are NOT
recommended.
READ NEXT:
Towing Caravans and Trailers
(Europe/Russia/Turkey/Israel/South Africa)
Your Mazda was designed and built primarily to carry passengers and cargo.
If you tow a trailer, follow these instructions
Information concerning safe driving and stopping.
SEE MORE:
DRIVE PLATE REMOVAL/INSTALLATION
1. Remove the transaxle. (See AUTOMATIC TRANSAXLE REMOVAL/INSTALLATION).
2. Remove in the order indicated in the table.
3. Install in the reverse order of removal.
Drive plate installation bolts
Adapter
Drive plate
Drive Plate Installation Bolts Removal Note
The parking sensor system uses ultrasonic sensors to detect obstructions
around the vehicle
while parking the vehicle in a garage or during parallel parking when the shift
lever is
in reverse (R). The system is equipped with an assist device to notify the
driver of the
approximate distance
© 2016-2022 Copyright www.m2info.net
