Mazda 2: Symptom Diagnostic Index

Mazda 2 2007-2014 Service Manual / Engine / Symptom Diagnostic Index

Diagnostic Index

Mazda 2. SYMPTOM DIAGNOSTIC INDEX

Mazda 2. SYMPTOM DIAGNOSTIC INDEX

Mazda 2. SYMPTOM DIAGNOSTIC INDEX

CONTROL SYSTEM DEVICE AND CONTROL RELATIONSHIP CHART

READ NEXT:

 Intermittent Concern Troubleshooting

Vibration Method 1. If malfunction occurs or becomes worse while driving on a rough road or when engine is vibrating, perform the steps below. NOTE: There are several reasons vehicle or engine vibr

 Engine Control System Operation Inspection

Main Relay Operation Inspection 1. Verify that the main relay clicks when the ignition switch is turned to the ON position, then off. If there is no operation sound, inspect the following: Main r

 Engine System

ENGINE LOCATION INDEX Engine (See ENGINE TUNE-UP) (See COMPRESSION INSPECTION) (See ENGINE REMOVAL/INSTALLATION) (See ENGINE DISASSEMBLY/ASSEMBLY) Drive belt (See DRIVE BELT INSPE

SEE MORE:

 Air Fuel Ratio (A/F) Sensor

AIR FUEL RATIO (A/F) SENSOR REMOVAL/INSTALLATION WARNING: A hot engine and exhaust system can cause severe burns. Turn off the engine and wait until they are cool before removing the exhaust system. 1. Disconnect the negative battery cable. 2. Remove the air cleaner cover. (See INTAKE-AIR SYS

 Engine Coolant

Inspecting Coolant Level WARNING Do not use a match or live fl ame in the engine compartment. DO NOT ADD COOLANT WHEN THE ENGINE IS HOT: A hot engine is dangerous. If the engine has been running, parts of the engine compartment can become very hot. You could be burned. Carefully inspect th

© 2016-2020 Copyright www.m2info.net