Mazda 2: Switches and Controls

READ NEXT:

 Lighting Control

Headlights Turn the headlight switch to turn the headlights, other exterior lights and instrument panel illumination on or off. When the lights are turned on, the lights-on indicator light in t

 Front Fog Lights

Can be used when the ignition is switched ON. Use this switch to turn on the front fog lights. The front fog lights will improve visibility at night and during foggy conditions. To turn the

 Rear Fog Light

Can be used when the ignition is switched ON. The rear fog light helps your vehicle to be seen. When the lights are turned on, the rear fog lights indicator light in the instrument cluster t

SEE MORE:

 Running Out of Fuel (SKYACTIV-D 1.5)

CAUTION Do not try starting the engine for more than 30 seconds at a time. Doing so, could damage the starter. If the engine does not start on the fi rst try wait about 10 seconds before trying again. If your vehicle runs out of fuel, add at least 10 L (2.6 US gal, 2.2 Imp gal) of fuel, and

 General Procedures

Wheel and Tire Installation 1. When installing the wheels and tires, tighten the wheel nuts in a criss-cross pattern to the following tightening torque. Tightening torque 88-118 N*m {9.0-12 Kgf*m, 65-87 ft*lbf} Brake Lines Disconnection 1. If any brake line has been disconnected during the pr

© 2016-2022 Copyright www.m2info.net