Mazda 2: Push-Starting

Do not push-start your Mazda.

WARNING

Never tow a vehicle to start it: Towing a vehicle to start it is dangerous. The vehicle being towed could surge forward when its engine starts, causing the two vehicles to collide. The occupants could be injured.

CAUTION

Do not push-start a vehicle that has a manual transaxle. It can damage the emission control system.

NOTE

You cannot start a vehicle with an automatic transaxle by pushing it.

READ NEXT:

 Running Out of Fuel (SKYACTIV-D 1.5)

CAUTION Do not try starting the engine for more than 30 seconds at a time. Doing so, could damage the starter. If the engine does not start on the fi rst try wait about 10 seconds before trying a

 Overheating

If the High engine coolant temperature warning light illuminates, the vehicle loses power, or you hear a loud knocking or pinging noise, the engine is probably too hot. WARNING Switch the ignit

 Emergency Towing

SEE MORE:

 Rear Axle

REAR AXLE LOCATION INDEX Rear axle component REAR AXLE INSPECTION Wheel Bearing Play Inspection 1. Inspect the wheel bearing play in the same way as the front axle. (See WHEEL HUB, STEERING KNUCKLE INSPECTION). If it exceeds the specification, replace the wheel hub component. (See WHEEL HUB

 Fuel Tank Pressure Sensor

FUEL TANK PRESSURE SENSOR REMOVAL/INSTALLATION CAUTION: The fuel tank pressure sensor cannot be removed as a single unit. When replacing the fuel tank pressure sensor, replace it together with the evaporative hose component as a single unit. 1. Disconnect the negative battery cable. 2. Dis

© 2016-2021 Copyright www.m2info.net