Mazda 2: Pre-Delivery Inspection

Pre-Delivery Inspection Table

Exterior

INSPECT and ADJUST, if necessary, the following items to specification:

INSTALL the following parts:

Under hood-engine off

INSPECT and ADJUST, if necessary, the following items to specification:

Interior

INSTALL the following items:

INSPECT the operations of the following items:

INSPECT the following items:

INSPECT and ADJUST, if necessary, the following items:

Under hood-engine running at operating temperature

INSPECT the following items:

On hoist

INSPECT the following items:

Road test

INSPECT the following items:

After road test

INSPECT for necessary owner information materials, tools, and spare tire in vehicle
The following items must be completed just before delivery to your customer.

Initial setting of Maintenance Monitor

ADJUST maintenance interval

READ NEXT:

 Scheduled Maintenance

Scheduled Maintenance Table for U.S.A., CANADA and Puerto Rico Schedule 1: (Normal Driving Conditions) for U.S.A. The vehicle is mainly operated where none of the "unique driving conditions" apply.

 Engine

 Foreword

When the customer reports a vehicle malfunction, check the malfunction indicator lamp (MIL) indication and diagnostic trouble code (DTC), then diagnose the malfunction according to the followin

SEE MORE:

 Refrigerant Charging

CAUTION: Do not exceed the specification when charging the system with refrigerant. Doing so will decrease the efficiency of the air conditioner or damage the refrigeration cycle parts. Charging Recycled R-134a Refrigerant 1. Connect an R-134a recovery/recycling/recharging device to the veh

 Blind Spot Monitoring (BSM) System

The Blind Spot Monitoring (BSM) system is designed to assist the driver in checking the area to the rear of the vehicle on both sides during lane changes by alerting the driver to the presence of vehicles approaching from the rear in an adjacent lane. The Blind Spot Monitoring (BSM) system

© 2016-2021 Copyright www.m2info.net