Mazda 2: Message Indicated on Display
If a message is displayed in the centre display (Type C/Type D audio), take
appropriate
action (in a calm manner) according to the displayed message.

Stop Vehicle in Safe Place Immediately
If the following messages are displayed in the centre display (Type C/Type D
audio), a
vehicle system may be malfunctioning. Stop the vehicle in a safe place and
contact an
Authorised Mazda Repairer.

Verify Display Content
Displays in the following cases:

READ NEXT:
Lights-On Reminder
If lights are on and the ignition is switched
to ACC or the ignition is switched off, a
continuous beep sound will be heard when
the driver's door is opened.
NOTE
When the
If the vehicle battery is dead or there is a
malfunction in the electrical system and
the liftgate/boot lid can not be opened,
perform the following procedure as an
emergency measure to Open it:
If the Active Driving Display does not
operate
If the active driving display does not
operate, switch the ignition off and
then restart the engine. If the active
driving display does not operate
SEE MORE:
AIR FUEL RATIO (A/F) SENSOR REMOVAL/INSTALLATION
WARNING:
A hot engine and exhaust system can cause severe burns. Turn off the
engine and wait
until they are cool before removing the exhaust system.
1. Disconnect the negative battery cable.
2. Remove the air cleaner cover. (See INTAKE-AIR SYS
WARNING:
Always inspect the steering component carefully for any shock or impact
which may
have occurred during a collision or servicing operation. If a damaged part
or a part
suspected of being damaged is used, it could result in an unexpected
accident due to
the steering mechanism being
© 2016-2021 Copyright www.m2info.net