Mazda 2: Manual Type

Type A

Type A


Type B

Type B


Type C

Type C


Type D

Type D


Control Switches

Temperature control dial

(Type A/Type B/Type C) This dial controls temperature. Turn it clockwise for hot and anticlockwise for cold.

(Type D) This dial controls the air temperature when using the air conditioner. Turn it clockwise for cold.

Fan control dial

This dial allows variable fan speeds.

0—Fan off

1—Low speed

2—Medium low speed

3—Medium high speed

4—High speed

Mode selector dial

Turn the mode selector dial to select airfl ow mode (page 5-4 ).

NOTE

A/C switch (Type A/Type C/Type D)

Press the A/C switch to turn the air conditioner on. The indicator light on the switch will illuminate when the fan control dial is set at position 1, 2, 3, or 4.

Press the switch once again to turn the air conditioner off.

NOTE

The air conditioner may not function when the outside temperature approaches 0 °C (32 °F).

Air intake selector (Type A/Type B)

This switch controls the source of air entering the vehicle.

Press the air intake selector switch to alternate between the outside air and recirculated air modes.

Recirculated air mode


Outside air is shut off. Air within the vehicle is recirculated.

Outside air mode


Outside air is allowed to enter the cabin. Use this mode for ventilation or windscreen defrosting.

WARNING

Do not use the recirculated air mode in cold or rainy weather: Using the recirculated air mode in cold or rainy weather is dangerous as it will cause the windows to fog up. Your vision will be hampered, which could lead to a serious accident.

Air intake selector (Type C/Type D)

This lever controls the source of air entering the vehicle.

It is recommended that under normal conditions the switch be kept in the outside air position.

Recirculated air position


Outside air is shut off. Air within the vehicle is recirculated.

Outside air position


(Type C) Outside air is taken into the vehicle. Use this position for normal ventilation and heating.

(Type D) Outside air is taken into the vehicle. Use this position for normal ventilation.

WARNING

Do not use the position
in cold or rainy weather: Using the position in cold or rainy
weather is dangerous as it will cause the windows to fog up. Your vision will be hampered, which could lead to a serious accident.

Heating

  1. Set the mode selector dial to the
    position.
  2. (Type A/Type B)

Set the air intake selector to the outside air mode.

(Type C) Set the air intake selector to the
position.

  1. Set the temperature control dial to the hot position.
  2. Set the fan control dial to the desired speed.
  3. (Type A/Type C) If dehumidifi ed heating is desired, turn on the air conditioner.

NOTE

Cooling (With air conditioner)

  1. Set the mode selector dial to the
    position.
  2. Set the temperature control dial to the cold position
  3. Set the fan control dial to the desired speed.
  4. Turn on the air conditioner by pressing the A/C switch.
  5. After cooling begins, adjust the fan control dial and temperature control dial as needed to maintain maximum comfort.

CAUTION

If the air conditioner is used while driving up long hills or in heavy traffi c, monitor the engine coolant temperature warning light to see if it is illuminated or fl ashing (page 4-37 ).

The air conditioner may cause engine overheating. If the warning light is illuminated or fl ashing, turn the air conditioning off (page 7-26 ).

NOTE

Ventilation

  1. Set the mode selector dial to the
    position.
  2. (Type A/Type B) Set the air intake selector to the outside air mode.

    (Type C/Type D) Set the air intake selector to the
    position.

  3. Set the temperature control dial to the desired position.
  4. Set the fan control dial to the desired speed.

Windscreen Defrosting and Defogging

  1. Set the mode selector dial to the
    position.
  2. (Type C/Type D) Set the air intake selector to the
    position.
  3. Set the temperature control dial to the desired position.
  4. Set the fan control dial to the desired speed.
  5. (Type A/Type C) If dehumidifi ed heating is desired, turn on the air conditioner.

    (Type D) Press the A/C switch to turn on the air conditioner.

WARNING

Do not defog the windscreen using the
position with the temperature control set to the cold position (Type A/ Type B/Type C): Using the

position with the temperature control set to the cold position is dangerous as it will cause the outside of the windscreen to fog up.

Your vision will be hampered, which could lead to a serious accident. Set the temperature control to the hot or warm position when using the  position.


Do not leave the air conditioner in the
position with the temperature control set to cold after the windscreen has defogged (Type D): Leaving the air conditioner in the

position with the temperature control set to cold after the windscreen has defogged is dangerous as the outside of the windscreen will fog up. Your vision will be hampered, which could lead to a serious accident.

Set the mode selector dial except the
position and turn on the windscreen wipers to clear the window.

NOTE

Dehumidifying (With air conditioner)

Operate the air conditioner in cool or cold weather to help defog the windscreen and side windows.

  1. Set the mode selector dial to the desired position.
  2. (Type A) Set the air intake selector to the outside air mode.

    (Type C/Type D) Set the air intake selector to the position.

  3. Set the temperature control dial to the
    desired position.
  4. Set the fan control dial to the desired speed.
  5. Turn on the air conditioner by pressing the A/C switch.

NOTE

(Type A/Type C) One of the functions of the air conditioner is dehumidifying the air and, to use this function, the temperature does not have to be set to cold.

Therefore, set the temperature control dial to the desired position (hot or cold) and turn on the air conditioner when you want to dehumidify the cabin air.

READ NEXT:

 Fully Automatic Type

European model Except European model Control Switches Temperature control dial This dial controls temperature. Turn it clockwise for hot and anticlockwise for cold. Fan control dial Th

 Audio System

 Aerial

Embedded Type * The aerial is embedded into the window glass. CAUTION When washing the inside of the window which has an aerial, use a soft cloth dampened in lukewarm water, gently wiping the a

SEE MORE:

 Message Indicated on Display

If a message is displayed in the centre display (Type C/Type D audio), take appropriate action (in a calm manner) according to the displayed message. Stop Vehicle in Safe Place Immediately If the following messages are displayed in the centre display (Type C/Type D audio), a vehicle syst

 Engine Oil

NOTE Changing the engine oil should be done by an expert repairer, we recommend an Authorised Mazda Repairer. Recommended Oil In order to keep the maintenance interval (page 6-3 ) and to protect the engine from damage caused by poor lubrication, it is vitally important to make use of engine

© 2016-2020 Copyright www.m2info.net