Mazda 2: If a Warning Light Turns On or Flashes
If any warning light turns on/fl ashes, take appropriate action for each
light. There is no
problem if the light turns off, however if the light does not turn off or turns
on/fl ashes again,
consult an Authorised Mazda Repairer.
(Vehicles with type C/type D audio)
The warning contents can be verifi ed on the audio.
- Select the
icon on the home
screen to display the applications screen.
- Select the “Warning Guidance”.
Stop Vehicle in Safe Place Immediately
If any of the following warning lights turns on, the system may have a
malfunction. Stop the
vehicle in a safe place immediately and contact an Authorised Mazda Repairer.
Contact Authorised Mazda Repairer and Have Vehicle Inspected
If any of the following warning lights turns on/fl ashes, the system may have
a malfunction.
Contact an expert repairer, we recommend an Authorised Mazda Repairer to have
your
vehicle inspected.
Taking Action
Take the appropriate action and verify that the warning light turns off.
KEY Warning Light
Take the appropriate action and verify that the warning light turns off.
READ NEXT:
If a message is displayed in the centre display (Type C/Type D audio), take
appropriate
action (in a calm manner) according to the displayed message.
Stop Vehicle in Safe Place Immediately
If
Lights-On Reminder
If lights are on and the ignition is switched
to ACC or the ignition is switched off, a
continuous beep sound will be heard when
the driver's door is opened.
NOTE
When the
If the vehicle battery is dead or there is a
malfunction in the electrical system and
the liftgate/boot lid can not be opened,
perform the following procedure as an
emergency measure to Open it:
SEE MORE:
DTC Reading Procedure
1. Connect the M-MDS (IDS) to the DLC-2.
2. After the vehicle is identified, select the following items from the
initialization screen of
the IDS.
Select "Self Test".
Select "Modules".
Select "PCM".
3. Then, select the "Retrieve CMDTCs" and perform procedures according t
CHARCOAL CANISTER REMOVAL/INSTALLATION
CAUTION:
Disconnecting/connecting the quick release connector without cleaning it
may cause
damage to the fuel pipe and quick release connector. Always clean the quick
release
connector joint area before disconnecting/connecting using a cloth or soft
© 2016-2021 Copyright www.m2info.net
