Mazda 2: Identification Number Locations
Mazda 2 2007-2014 Service Manual / General Information / Identification Number Locations
Vehicle Identification Number (VIN)
- The VIN marking position is located on the floor on the front passenger-side.
- If the VIN plate is adhered to the dashboard, it is located in the position shown in the figure.
Engine Identification Number
SAE Standards
- In accordance with new regulations, SAE (Society of Automotive Engineers) standard names and abbreviations are now used in this manual. The table below lists the names and abbreviations that have been used in Mazda manuals up to now and their SAE equivalents.
- #1: Diagnostic trouble codes depend on the diagnostic test mode.
- #2: Controlled by the PCM
- #3: Device that controls engine and powertrain
- #4: Directly connected to exhaust manifold
Abbreviations
READ NEXT:
Pre-Delivery Inspection
Pre-Delivery Inspection Table
Exterior
INSPECT and ADJUST, if necessary, the following items to specification:
Glass, exterior bright metal and paint for damage
Wheel lug nuts
All weatherstrips fo
Scheduled Maintenance
Scheduled Maintenance Table for U.S.A., CANADA and Puerto Rico
Schedule 1: (Normal Driving Conditions) for U.S.A.
The vehicle is mainly operated where none of the "unique driving conditions"
apply.
SEE MORE:
Automatic Transaxle Control System
AUTOMATIC TRANSAXLE CONTROL SYSTEM WIRING DIAGRAM
NOTE:
Only the transaxle-related information is described.
FOREWORD
When the customer reports a vehicle malfunction, check the malfunction
indicator lamp (MIL) illuminating, O/D
OFF indicator light flashing, and diagnostic trouble code (DTC)
DTC B0072:11/B0072:12/B0072:13/B0072:19/B0072:1A
System Malfunction Location
Detection Condition
WARNING:
Detection conditions are for understanding the DTC outline before
performing an
inspection. Performing an inspection according to only the detection
conditions may
cause injury due to an operating error, or damage the system. When
p
© 2016-2021 Copyright www.m2info.net