Mazda 2: Glass/Windows/Mirrors

GLASS/WINDOWS/MIRRORS LOCATION INDEX

Mazda 2. GLASS/WINDOWS/MIRRORS LOCATION INDEX

  1. Windshield
  2. Rearview mirror
  3. Power window motor
  4. Front power window regulator
  5. Front door glass
  6. Power outer mirror
  7. Power outer mirror switch
  8. Power window main switch
  9. Power window subswitch
  10. Rear power window regulator
  11. Rear door glass
  12. Rear window glass

FRONT DOOR GLASS REMOVAL/INSTALLATION

1. To access the glass installation bolt, adjust the position of the front door glass so that the height of the front door glass towards the rear is approx. 100 mm {3.94 in}.

Mazda 2. FRONT DOOR GLASS REMOVAL/INSTALLATION

2. Disconnect the negative battery cable.

3. Remove the inner garnish. (See INNER GARNISH REMOVAL/INSTALLATION).

4. Remove the front door trim. (See FRONT DOOR TRIM REMOVAL/INSTALLATION).

5. Remove the front door speaker. (See FRONT DOOR SPEAKER REMOVAL/INSTALLATION).

6. Remove the hole cover.

Mazda 2. FRONT DOOR GLASS REMOVAL/INSTALLATION

7. Remove the bolts.

CAUTION:

8. Lift up the front door glass, tilt it in the direction of arrow (1) shown in the figure, then remove it in the direction of arrow (2).

Mazda 2. FRONT DOOR GLASS REMOVAL/INSTALLATION

9. Install in the reverse order of removal.

CAUTION:

REAR DOOR GLASS REMOVAL/INSTALLATION

1. To access the glass installation bolt, adjust the position of the rear door glass that the height of the rear door glass towards the front is approx. 200 mm {7.87 in}.

Mazda 2. REAR DOOR GLASS REMOVAL/INSTALLATION

2. Disconnect the negative battery cable.

3. Remove the sail inner garnish. (See SAIL INNER GARNISH REMOVAL/INSTALLATION).

4. Remove the rear door garnish. (See REAR DOOR GARNISH REMOVAL/INSTALLATION).

5. Remove the rear door trim. (See REAR DOOR TRIM REMOVAL/INSTALLATION).

6. Remove the rear door speaker. (See REAR DOOR SPEAKER REMOVAL/INSTALLATION).

7. Remove the rear door glass guide and glass run channel as a single unit. (See Rear Door Glass Guide Removal Note).

8. Remove the hole cover A

Mazda 2. REAR DOOR GLASS REMOVAL/INSTALLATION

9. Slightly bend back the hole cover B.

Mazda 2. REAR DOOR GLASS REMOVAL/INSTALLATION

10. Remove the bolts.

Mazda 2. REAR DOOR GLASS REMOVAL/INSTALLATION

CAUTION:

11. Lift up the rear door glass, tilt it in the direction of arrow (1) shown in the figure, then remove it in the direction of arrow (2).

Mazda 2. REAR DOOR GLASS REMOVAL/INSTALLATION

12. Install in the reverse order of removal.

CAUTION:

Mazda 2. REAR DOOR GLASS REMOVAL/INSTALLATION

Rear Door Glass Guide Removal Note

1. Pull up the rear door weatherstrip and remove the screw.

Mazda 2. REAR DOOR GLASS REMOVAL/INSTALLATION

2. Remove the bolt.

3. Slide the rear door glass guide in the direction of the arrow shown in the figure.

Mazda 2. REAR DOOR GLASS REMOVAL/INSTALLATION

4. While rotating the rear door glass guide in the direction of the arrow shown in the figure, pull out the rear door glass guide and the glass run channel as a single unit from the rear door.

WINDSHIELD REMOVAL

1. Disconnect the negative battery cable.

2. Remove the following parts:

  1. Windshield wiper arm and blade (See WINDSHIELD WIPER ARM AND BLADE REMOVAL/INSTALLATION).
  2. Cowl grille (See COWL GRILLE REMOVAL/INSTALLATION).
  3. Cowl panel (See COWL PANEL REMOVAL/INSTALLATION).
  4. Rain sensor (vehicles with rain sensor) (See RAIN SENSOR REMOVAL/INSTALLATION).
  5. Rear view mirror (See REARVIEW MIRROR REMOVAL).
  6. A-pillar trim (See A-PILLAR TRIM REMOVAL/INSTALLATION).
  7. Sunvisor (See SUNVISOR REMOVAL/INSTALLATION).
  8. Assist handle (See ASSIST HANDLE REMOVAL/INSTALLATION).
  9. Interior light (See INTERIOR LIGHT REMOVAL/INSTALLATION).

3. Set the headliner out of the way.

4. Apply protective tape along the edge of the body.

Mazda 2. WINDSHIELD REMOVAL

NOTE:

5. Remove the windshield molding by pulling it outward.

NOTE:

Not Reusing Windshield

NOTE:

WARNING:

  1. Using piano wire with bare hands can cause injury. Always wear gloves when using piano wire.

1. Cut out the sealant all around the glass using a sealant remover.

Mazda 2. WINDSHIELD REMOVAL

2. Remove the windshield.

Reusing Windshield

WARNING:

  1. Using piano wire with bare hands can cause injury. Always wear gloves when using piano wire.

CAUTION:

NOTE:

1. Avoiding the pin on the inside of the vehicle, insert piano wire which has been cut to sufficient length.

Mazda 2. WINDSHIELD REMOVAL

2. Wind each end of piano wire around a bar.

NOTE:

3. Secure one end of piano wire, and while pulling the other end, cut the sealant around the windshield.

Mazda 2. WINDSHIELD REMOVAL

4. Pinch the pin from the inside of the vehicle and detach it.

5. Remove the windshield.

6. If the pin is damaged, remove the pin.

NOTE:

WINDSHIELD INSTALLATION

WARNING:

CAUTION:

1. Remove the sealant along the perimeter of the glass using a utility knife. (When reusing the glass)

2. Clean and degrease an approx. 50 mm {2.0 in} wide strip along the perimeter of the windshield.

3. Inspect the glass for cracks. If it is cracked, chamfer it using sandpaper.

4. Align the alignment marks made before removal and install the pin to the windshield referring to the figure. (Reusing glass, pin removed)

Mazda 2. WINDSHIELD INSTALLATION

5. Install the windshield molding.

Mazda 2. WINDSHIELD INSTALLATION

6. Apply glass primer on the glass as shown in the figure, then allow it to dry for approx. 30 min.

CAUTION:

NOTE:

Mazda 2. WINDSHIELD INSTALLATION

7. Cut away the old sealant using a utility knife so that 1-2 mm {0.04-0.07 in} thickness of sealant remains along the perimeter of the frame.

Mazda 2. WINDSHIELD INSTALLATION

8. If the sealant has come off completely in any one place, apply some primer after degreasing, and allow it approx. 30 min to dry.

Then apply 2 mm {0.08 in} thickness of new sealant.

CAUTION:

9. Clean and degrease along the perimeter of the bonding area on the body.

10. Apply body primer on the body as shown in the figure, then allow it to dry for approx. 30 min.

CAUTION:

NOTE:

Mazda 2. WINDSHIELD INSTALLATION

11. Apply sealant to the area of the glass surface as shown in the figure.

Mazda 2. WINDSHIELD INSTALLATION

12. Insert the positioning pins to the body and install the windshield.

13. Verify that the clearance between the A-pillar and the roof is within the range shown in the figure, and press along the perimeter of the glass.

Mazda 2. WINDSHIELD INSTALLATION

14. Install the headliner.

15. Install the following parts:

  1. Interior light (See INTERIOR LIGHT REMOVAL/INSTALLATION).
  2. Assist handle (See ASSIST HANDLE REMOVAL/INSTALLATION).
  3. Sunvisor (See SUNVISOR REMOVAL/INSTALLATION).
  4. A-pillar trim (See A-PILLAR TRIM REMOVAL/INSTALLATION).
  5. Rearview mirror (See REARVIEW MIRROR INSTALLATION).
  6. Rain sensor (vehicles with rain sensor) (See RAIN SENSOR REMOVAL/INSTALLATION).
  7. Cowl panel (See COWL PANEL REMOVAL/INSTALLATION).
  8. Cowl grille (See COWL GRILLE REMOVAL/INSTALLATION).
  9. Windshield wiper arm and blade (See WINDSHIELD WIPER ARM AND BLADE REMOVAL/INSTALLATION).

16. Allow the sealant to harden completely. Sealant hardening time: 24 h

REAR WINDOW GLASS REMOVAL

1. Disconnect the negative battery cable.

2. Remove the following parts:

  1. Rear wiper arm and blade (See REAR WIPER ARM AND BLADE REMOVAL/INSTALLATION).
  2. Liftgate lower trim (See LIFTGATE LOWER TRIM REMOVAL/INSTALLATION).
  3. Rear spoiler (See REAR SPOILER REMOVAL).
  4. High-mount brake light (See HIGH MOUNT BRAKE LIGHT REMOVAL/INSTALLATION).

3. Disconnect the filament connector.

Mazda 2. REAR WINDOW GLASS REMOVAL

4. Apply protective tape along the edge of the body.

Mazda 2. REAR WINDOW GLASS REMOVAL

NOTE:

5. Avoiding the pin on the inside of the vehicle, insert piano wire which has been cut to sufficient length.

Mazda 2. REAR WINDOW GLASS REMOVAL

WARNING:

  1. Using piano wire with bare hands can cause injury. Always wear gloves when using piano wire.

NOTE:

6. Wind each end of piano wire around a bar.

NOTE:

7. Secure one end of piano wire, and while pulling the other end, cut the sealant around the rear window glass.

Mazda 2. REAR WINDOW GLASS REMOVAL

8. Pinch the pin from the inside of the vehicle and detach it.

Mazda 2. REAR WINDOW GLASS REMOVAL

9. Remove the rear window glass.

REAR WINDOW GLASS INSTALLATION

WARNING:

CAUTION:

1. Remove sealant along the perimeter of the glass using a utility knife or scraper. (When reusing the glass) 2. Clean and degrease an approx. 50 mm {2.0 in} wide strip along the perimeter of the glass.

3. Inspect the glass for cracks. If it is cracked, chamfer it using sandpaper.

4. Install the spacers, fasteners, and pins to the glass as shown in the figure.

Mazda 2. REAR WINDOW GLASS INSTALLATION

5. Install the fastener to the bead on the body side.

Mazda 2. REAR WINDOW GLASS INSTALLATION

6. Apply glass primer on the glass as shown in the figure then allow it to dry for approx. 30 min.

CAUTION:

NOTE:

Mazda 2. REAR WINDOW GLASS INSTALLATION

7. Cut away the old sealant using a utility knife or scraper so that 1-2 mm {0.04-0.07 in} thickness of sealant remains along the perimeter of the frame.

Mazda 2. REAR WINDOW GLASS INSTALLATION

8. Clean and degrease along the perimeter of the bonding area on the body.

9. If the sealant has come off completely in any one place, apply some primer, and allow it to dry for approx. 30 min.

CAUTION:

10. Apply body primer on the body as shown in the figure, then allow it to dry for approx. 30 min.

CAUTION:

NOTE:

Mazda 2. REAR WINDOW GLASS INSTALLATION

11. Apply sealant to the area of the glass surface as shown in the figure.

Mazda 2. REAR WINDOW GLASS INSTALLATION

12. Install the rear window glass.

13. Verify that the gap at the upper and lower parts of the glass is within the specification shown in the figure, then press along the perimeter of the glass.

Mazda 2. REAR WINDOW GLASS INSTALLATION

14. Connect the filament connector.

15. Install the following parts:

  1. High-mount brake light (See HIGH MOUNT BRAKE LIGHT REMOVAL/INSTALLATION).
  2. Rear spoiler (See REAR SPOILER INSTALLATION).
  3. Liftgate lower trim (See LIFTGATE LOWER TRIM REMOVAL/INSTALLATION).
  4. Rear wiper arm and blade (See REAR WIPER ARM AND BLADE REMOVAL/INSTALLATION).

16. Allow the sealant to harden completely. Sealant hardening time: 24 h

FRONT POWER WINDOW REGULATOR REMOVAL/INSTALLATION

1. To access the glass installation bolt, adjust the position of the front door glass so that the height of the front door glass towards the rear is approx. 100 mm {3.94 in}.

Mazda 2. FRONT POWER WINDOW REGULATOR REMOVAL/INSTALLATION

2. Disconnect the negative battery cable.

3. Remove the following parts:

  1. Inner garnish (See INNER GARNISH REMOVAL/INSTALLATION).
  2. Front door trim (See FRONT DOOR TRIM REMOVAL/INSTALLATION).
  3. Front door speaker (See FRONT DOOR SPEAKER REMOVAL/INSTALLATION).
  4. Front door glass (See FRONT DOOR GLASS REMOVAL/INSTALLATION).
  5. Front power window motor (See POWER WINDOW MOTOR REMOVAL/INSTALLATION).

4. Remove the nuts.

Mazda 2. FRONT POWER WINDOW REGULATOR REMOVAL/INSTALLATION

5. Insert a hand through the front door speaker installation hole and rotate the drum housing in the direction of the arrow shown in the figure to detach the tabs from the front door module panel.

Mazda 2. FRONT POWER WINDOW REGULATOR REMOVAL/INSTALLATION

6. Remove the front power window regulator from the speaker installation hole.

Mazda 2. FRONT POWER WINDOW REGULATOR REMOVAL/INSTALLATION

7. Install in the reverse order of removal.

CAUTION:

REAR POWER WINDOW REGULATOR REMOVAL/INSTALLATION

1. To access the glass installation bolt, adjust the position of the rear door glass that the height of the rear door glass towards the front is approx. 200 mm {7.87 in}.

Mazda 2. REAR POWER WINDOW REGULATOR REMOVAL/INSTALLATION

2. Disconnect the negative battery cable.

3. Remove the following parts:

  1. Sail inner garnish (See SAIL INNER GARNISH REMOVAL/INSTALLATION).
  2. Rear door garnish (See REAR DOOR GARNISH REMOVAL/INSTALLATION).
  3. Rear door trim (See REAR DOOR TRIM REMOVAL/INSTALLATION).
  4. Rear door speaker (See REAR DOOR SPEAKER REMOVAL/INSTALLATION).
  5. Rear door glass (See REAR DOOR GLASS REMOVAL/INSTALLATION).

4. Remove the nuts.

Mazda 2. REAR POWER WINDOW REGULATOR REMOVAL/INSTALLATION

5. Insert your hand through the rear door speaker installation hole, rotate the drum housing in the direction shown in the figure and disengage the tabs from the rear door module panel.

Mazda 2. REAR POWER WINDOW REGULATOR REMOVAL/INSTALLATION

6. Remove the rear power window regulator from the rear speaker installation hole.

Mazda 2. REAR POWER WINDOW REGULATOR REMOVAL/INSTALLATION

7. Install in the reverse order of removal.

CAUTION:

POWER WINDOW MOTOR REMOVAL/INSTALLATION

Front Power Window Motor

1. Fully lower the front door glass.

2. Disconnect the negative battery cable.

3. Remove the inner garnish (See INNER GARNISH REMOVAL/INSTALLATION).

4. Remove the front door trim (See FRONT DOOR TRIM REMOVAL/INSTALLATION).

CAUTION:

Mazda 2. POWER WINDOW MOTOR REMOVAL/INSTALLATION

5. Disconnect the front power window motor connector, remove the bolt, then remove the front power window motor from the front power window regulator drum in the direction of the arrow shown in the figure.

Mazda 2. POWER WINDOW MOTOR REMOVAL/INSTALLATION

6. Install in the reverse order of removal.

NOTE:

Rear Power Window Motor

1. Fully lower the rear door glass.

2. Disconnect the negative battery cable.

3. Remove the sail inner garnish. (See SAIL INNER GARNISH REMOVAL/INSTALLATION).

4. Remove the rear door trim. (See REAR DOOR TRIM REMOVAL/INSTALLATION).

CAUTION:

Mazda 2. POWER WINDOW MOTOR REMOVAL/INSTALLATION

5. Disconnect the rear power window motor connector, remove the bolt, then remove the power window motor from the power window regulator drum.

Mazda 2. POWER WINDOW MOTOR REMOVAL/INSTALLATION

6. Install in the reverse order of removal.

NOTE:

POWER WINDOW MOTOR INSPECTION

Driver's Side

1. Disconnect the negative battery cable.

2. Remove the inner garnish. (See INNER GARNISH REMOVAL/INSTALLATION).

3. Remove the front door trim. (See FRONT DOOR TRIM REMOVAL/INSTALLATION).

4. Disconnect the power window motor connector.

5. Apply battery positive voltage and connect the ground to power window motor terminals E and F, and then inspect the power window motor operation.

Mazda 2. POWER WINDOW MOTOR INSPECTION

Mazda 2. POWER WINDOW MOTOR INSPECTION

6. Connect the battery positive voltage to power window motor terminal D and connect terminal C to ground.

7. Operate the power window motor and measure the voltage at terminals A and B.

Voltage

Passenger's Side

1. Disconnect the negative battery cable.

2. Remove the inner garnish. (See INNER GARNISH REMOVAL/INSTALLATION).

3. Remove the front door trim. (See FRONT DOOR TRIM REMOVAL/INSTALLATION).

4. Disconnect the power window motor connector.

5. Apply battery positive voltage and connect the ground to the power window motor terminals, and then inspect the power window motor operation.

Mazda 2. POWER WINDOW MOTOR INSPECTION

Mazda 2. POWER WINDOW MOTOR INSPECTION

Rear Side

1. Disconnect the negative battery cable.

2. Remove the sail inner garnish. (See SAIL INNER GARNISH REMOVAL/INSTALLATION).

3. Remove the Rear door trim. (See REAR DOOR TRIM REMOVAL/INSTALLATION).

4. Disconnect the power window motor connector.

5. Apply battery positive voltage and connect the ground to the power window motor terminals, and then inspect the power window motor operation.

Mazda 2. POWER WINDOW MOTOR INSPECTION

Mazda 2. POWER WINDOW MOTOR INSPECTION

POWER WINDOW MAIN SWITCH REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.

2. Remove the inner garnish. (See INNER GARNISH REMOVAL/INSTALLATION).

3. Remove the driver's side front door trim. (See FRONT DOOR TRIM REMOVAL/INSTALLATION).

4. Remove the power window main switch. (See FRONT DOOR TRIM DISASSEMBLY/ASSEMBLY).

5. Install in the reverse order of removal.

POWER WINDOW MAIN SWITCH INSPECTION

1. Switch the ignition to ON.

2. Verify that the door glass (driver's side) can be operated forapprox. 43 s after the ignition switched to off.

3. Disconnect the negative battery cable.

4. Remove the inner garnish. (See INNER GARNISH REMOVAL/INSTALLATION).

5. Remove the front door trim. (See FRONT DOOR TRIM REMOVAL/INSTALLATION).

6. Remove the switch panel. (See FRONT DOOR TRIM DISASSEMBLY/ASSEMBLY).

7. Connect the power window main switch connector.

8. Connect the negative battery cable.

9. Measure the voltage at each terminal.

10. If the system does not work normally even though the inspection items or related wiring harnesses do not have any malfunction, replace the power window main switch.

Mazda 2. POWER WINDOW MAIN SWITCH INSPECTION

Terminal Voltage Table (Reference)

Mazda 2. POWER WINDOW MAIN SWITCH INSPECTION

Mazda 2. POWER WINDOW MAIN SWITCH INSPECTION

Mazda 2. POWER WINDOW MAIN SWITCH INSPECTION

Mazda 2. POWER WINDOW MAIN SWITCH INSPECTION

POWER WINDOW SUBSWITCH REMOVAL/INSTALLATION

Passenger's Side

1. Disconnect the negative battery cable.

2. Remove the inner garnish. (See INNER GARNISH REMOVAL/INSTALLATION).

3. Remove the front door trim. (See FRONT DOOR TRIM REMOVAL/INSTALLATION).

4. Remove the power window subswitch. (See FRONT DOOR TRIM DISASSEMBLY/ASSEMBLY).

5. Install in the reverse order of removal.

Rear

1. Disconnect the negative battery cable.

2. Remove the sail garnish. (See SAIL GARNISH REMOVAL/INSTALLATION).

3. Remove the rear door garnish. (See REAR DOOR GARNISH REMOVAL/INSTALLATION).

4. Remove the rear door trim. (See REAR DOOR TRIM REMOVAL/INSTALLATION).

5. Remove the power window subswitch. (See REAR DOOR TRIM DISASSEMBLY/ASSEMBLY).

6. Install in the reverse order of removal.

POWER WINDOW SUBSWITCH INSPECTION

Passenger's Side

1. Disconnect the negative battery cable.

2. Remove the inner garnish. (See INNER GARNISH REMOVAL/INSTALLATION).

3. Remove the front door trim. (See FRONT DOOR TRIM REMOVAL/INSTALLATION).

4. Remove the power window subswitch. (See FRONT DOOR TRIM DISASSEMBLY/ASSEMBLY).

5. Verify that the continuity is as indicated in the table using a tester.

Mazda 2. POWER WINDOW SUBSWITCH INSPECTION

Mazda 2. POWER WINDOW SUBSWITCH INSPECTION

Rear

1. Disconnect the negative battery cable.

2. Remove the sail garnish. (See SAIL GARNISH REMOVAL/INSTALLATION).

3. Remove the rear door garnish. (See REAR DOOR GARNISH REMOVAL/INSTALLATION).

4. Remove the rear door trim. (See REAR DOOR TRIM REMOVAL/INSTALLATION).

5. Remove the power window subswitch. (See REAR DOOR TRIM DISASSEMBLY/ASSEMBLY).

6. Verify that the continuity is as indicated in the table using a tester.

Mazda 2. POWER WINDOW SUBSWITCH INSPECTION

Mazda 2. POWER WINDOW SUBSWITCH INSPECTION

POWER OUTER MIRROR REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.

2. Remove the inner garnish. (See INNER GARNISH REMOVAL/INSTALLATION).

3. Disconnect the power outer mirror connector.

Mazda 2. POWER OUTER MIRROR REMOVAL/INSTALLATION

4. Remove the bolts.

Mazda 2. POWER OUTER MIRROR REMOVAL/INSTALLATION

5. Remove the power outer mirror by pulling it in the direction of the arrow shown in the figure to release the tab.

6. Install in the reverse order of removal.

POWER OUTER MIRROR INSPECTION

Mirror glass adjustment

1. Disconnect the negative battery cable.

2. Remove the inner garnish. (See INNER GARNISH REMOVAL/INSTALLATION).

3. Remove the front door trim. (See FRONT DOOR TRIM REMOVAL/INSTALLATION).

4. Remove the power outer mirror. (See POWER OUTER MIRROR REMOVAL/INSTALLATION).

5. Apply battery positive voltage to the power outer mirror terminals and inspect the operation of the power outer mirror.

Mazda 2. POWER OUTER MIRROR INSPECTION

Mazda 2. POWER OUTER MIRROR INSPECTION

Mazda 2. POWER OUTER MIRROR INSPECTION

Heated outer mirror

1. Disconnect the negative battery cable.

2. Remove the inner garnish. (See INNER GARNISH REMOVAL/INSTALLATION).

3. Remove the front door trim. (See FRONT DOOR TRIM REMOVAL/INSTALLATION).

4. Remove the power outer mirror. (See POWER OUTER MIRROR REMOVAL/INSTALLATION).

5. Verify that the continuity is as indicated in the table using a circuit tester.

Mazda 2. POWER OUTER MIRROR INSPECTION

Mazda 2. POWER OUTER MIRROR INSPECTION

OUTER MIRROR GLASS REMOVAL

1. Disconnect the negative battery cable.

2. Press area A of the outer mirror glass so that area B moves outward.

Mazda 2. OUTER MIRROR GLASS REMOVAL

3. Detach pin A while lifting up the inside of the mirror glass holder.

Mazda 2. OUTER MIRROR GLASS REMOVAL

4. Pull the outer mirror glass and remove pins B.

5. Disconnect the connector. (Vehicles with heated outer mirror)

6. Remove the outer mirror glass.

OUTER MIRROR GLASS INSTALLATION

1. Connect the connector to the outer mirror glass. (Vehicles with heated outer mirror)

2. Press part A on the outer mirror glass and install pin A.

Mazda 2. OUTER MIRROR GLASS INSTALLATION

3. Press part B on the outer mirror glass and install pins B.

OUTER MIRROR GARNISH REMOVAL

1. Disconnect the negative battery cable.

2. Remove the outer mirror glass from the power outer mirror. (See OUTER MIRROR GLASS REMOVAL).

3. Pinch the end of the tab which is visible, and release the tab by pressing it toward the vehicle front (4 locations).

Mazda 2. OUTER MIRROR GARNISH REMOVAL

4. Grasp the upper side of the outer mirror garnish and remove it by pulling it in the direction of the arrow.

OUTER MIRROR GARNISH INSTALLATION

1. Position the outer mirror garnish against the mirror body in the direction of the arrow shown in the figure, and insert the outer mirror garnish tabs (5 locations) into the mirror body.

Mazda 2. OUTER MIRROR GARNISH INSTALLATION

2. Install the outer mirror garnish so that there are no gaps around the component.

3. Install the outer mirror glass. (See OUTER MIRROR GLASS INSTALLATION).

POWER OUTER MIRROR SWITCH REMOVAL/INSTALLATION

NOTE:

1. Disconnect the negative battery cable.

2. Remove the inner garnish. (See INNER GARNISH REMOVAL/INSTALLATION).

3. Remove the front door trim. (driver-side) (See FRONT DOOR TRIM REMOVAL/INSTALLATION).

4. Remove the power outer mirror switch. (See FRONT DOOR TRIM DISASSEMBLY/ASSEMBLY).

5. Install in the reverse order of removal.

POWER OUTER MIRROR SWITCH INSPECTION

1. Disconnect the negative battery cable.

2. Remove the inner garnish. (See INNER GARNISH REMOVAL/INSTALLATION).

3. Remove the front door trim. (See FRONT DOOR TRIM REMOVAL/INSTALLATION).

4. Remove the switch panel. (See FRONT DOOR TRIM DISASSEMBLY/ASSEMBLY).

5. Using a tester, verify that the continuity between the power outer mirror switch terminals is as indicated in the table.

Mazda 2. POWER OUTER MIRROR SWITCH INSPECTION

Mazda 2. POWER OUTER MIRROR SWITCH INSPECTION

FILAMENT INSPECTION

1. Switch the ignition to ON.

2. Turn the rear window defroster switch ON.

Mazda 2. FILAMENT INSPECTION

CAUTION:

3. Connect the positive lead of the tester to the positive side of each filament and the negative lead to ground.

4. Gradually slide the positive lead from the positive side to the negative side and verify that the voltage decreases accordingly.

Mazda 2. FILAMENT INSPECTION

Mazda 2. FILAMENT INSPECTION

FILAMENT REPAIR

1. Clean the filaments using isopropyl alcohol.

2. Affix tape along both sides of the filament to be repaired.

Mazda 2. FILAMENT REPAIR

3. Apply commercially available silver paint using a fine-tipped tool such as a small brush or a drawing pen.

4. After 2-3 min, peel off the tape being careful not to damage the painted area.

CAUTION:

5. Completely dry the repaired area referring the followings:

READ NEXT:

 Seat

SEAT LOCATION INDEX Rear seat back striker Front seat Front seat back trim Front seat cushion trim Front seat slide adjuster Front seat rail cover Front seat side cover Front seat back compo

 Security and Locks

SECURITY AND LOCKS LOCATION INDEX Locks and Openers Inner handle See INNER HANDLE REMOVAL/INSTALLATION.) Hood release lever (See HOOD LATCH AND RELEASE LEVER REMOVAL/INSTALLATION.) F

 Front Outer Handle

FRONT OUTER HANDLE REMOVAL/INSTALLATION 1. To access the glass installation bolt, position the front door glass so that the distance from the top of the front door glass to the upper part of the fron

SEE MORE:

 On-Board Diagnostic System

ON-BOARD DIAGNOSTIC SYSTEM WIRING DIAGRAM NOTE: Only the transaxle-related information is described. ON-BOARD DIAGNOSTIC SYSTEM DTC INSPECTION DTC Inspection Procedure (See ON-BOARD DIAGNOSTIC TEST). DTC Clearing Procedure (See AFTER REPAIR PROCEDURE). ON-BOARD DIAGNOSTIC SYSTEM DTC TABLE DTC

 Refrigerant Charging

CAUTION: Do not exceed the specification when charging the system with refrigerant. Doing so will decrease the efficiency of the air conditioner or damage the refrigeration cycle parts. Charging Recycled R-134a Refrigerant 1. Connect an R-134a recovery/recycling/recharging device to the veh

© 2016-2021 Copyright www.m2info.net