Mazda 2: Fuel System

FUEL SYSTEM LOCATION INDEX

Engine Compartment Side

Mazda 2. FUEL SYSTEM LOCATION INDEX

  1. Fuel distributor
    • (See FUEL INJECTOR REMOVAL/INSTALLATION)
  2. Quick release connector
    • (See QUICK RELEASE CONNECTOR REMOVAL/INSTALLATION)
  3. Fuel injector
    • (See FUEL INJECTOR REMOVAL/INSTALLATION)
    • (See FUEL INJECTOR INSPECTION)
  4. Fuel pump relay
    • (See RELAY INSPECTION.)

Fuel Tank Side

Mazda 2. FUEL SYSTEM LOCATION INDEX

  1. Fuel tank
    • (See FUEL TANK REMOVAL/INSTALLATION)
    • (See FUEL TANK INSPECTION)
  2. Breather hose
    • (See FUEL TANK REMOVAL/INSTALLATION)
  3. Fuel-filler pipe
    • (See FUEL TANK REMOVAL/INSTALLATION)
  4. Joint hose
    • (See FUEL TANK REMOVAL/INSTALLATION)
  5. Nonreturn valve
    • (See NONRETURN VALVE INSPECTION)
  6. Quick release connector
    • (See QUICK RELEASE CONNECTOR REMOVAL/INSTALLATION)
  7. Fuel pump unit
    • (See FUEL PUMP UNIT REMOVAL/INSTALLATION)
    • (See FUEL PUMP UNIT DISASSEMBLY/ASSEMBLY)
    • (See FUEL PUMP UNIT INSPECTION)

FUEL SYSTEM FLOW DIAGRAM

Mazda 2. FUEL SYSTEM FLOW DIAGRAM

READ NEXT:

 Before/After Service

BEFORE SERVICE PRECAUTION WARNING: Fuel vapor is hazardous. It can very easily ignite, causing serious injury and damage. Always keep sparks and flames away from fuel. Fuel line spills and leak

 Fuel Line Pressure

FUEL LINE PRESSURE INSPECTION WARNING: Fuel line spills and leakage from the pressurized fuel system are dangerous. Fuel can ignite and cause serious injury or death and damage. To prevent this,

 Fuel Tank

FUEL TANK REMOVAL/INSTALLATION WARNING: Repairing a fuel tank containing fuel is dangerous. Explosion or fire may cause death or serious injury. Always properly steam clean a fuel tank before rep

SEE MORE:

 Refrigerant Pressure Switch

REFRIGERANT PRESSURE SWITCH REMOVAL/INSTALLATION 1. Disconnect the negative battery cable. 2. Collect the refrigerant. (See REFRIGERANT CHARGING). 3. Remove the ground from the engine mount No.3. 4. Remove the air cleaner installation bolt and slide the air cleaner component aside. 5. Disconnec

 OBD-II Drive Mode

Using the OBD-II Drive Mode, the monitoring item requested by OBD-II regulations can be easily diagnosed. Performing the Drive Mode inspects the OBD-II system for proper operation and must be performed to ensure that no additional DTCs are present. The OBD-II Drive Mode is divided into the

© 2016-2022 Copyright www.m2info.net