Mazda 2: Fuel Economy Monitor
For vehicles with type C/type D audio, the Control Status, Fuel Consumption,
and
Effectiveness are switched and displayed by operating each icon in the display.
In addition, after completing a trip, the total energy effi ciency to date is
displayed in the
ending display when the ending display is turned on.
- Select the
icon on the home
screen to display the applications screen.
- Select the “Fuel Economy Monitor”.
- Operate the commander switch or touch the screen and display the menu.
NOTE
When the menu is displayed by touching the screen, the display is hidden
automatically
after 6 seconds.
- Select the icon in the menu and perform the operation. Each icon
operates as follows:

Fuel Consumption Display
Information regarding the fuel economy is displayed.

NOTE
The fuel economy data can be reset by doing the following operation:
- Press the reset switch from the menu screen.
- When the function which synchronizes the fuel economy monitor and the
trip meter
is on, reset trip A of the trip meter.
- Delete the average fuel economy information displayed in the trip
computer.
After resetting the fuel economy data, “-- -” is displayed while the
average fuel
economy is calculated.
Control Status Display
The i-stop operation status and the i-ELOOP power generating status are
displayed.



Effectiveness Display
The actual performance of the energy effi ciency is displayed.

Ending Screen Display
When the ignition is switched off from ON after completing a trip, the actual
performance
for the total fuel economy effi ciency is displayed for 5 seconds.
READ NEXT:
Drive selection is a system to switch the vehicle's drive mode. When the
sport mode is
selected, vehicle's response against accelerator operation is enhanced. Use the
sport mode
when higher vehi
Power steering is only operable when
the engine is running. If the engine is
off or if the power steering system is
inoperable, you can still steer, but it
requires more physical effort.
&
i-ACTIVSENSE is a collective term covering a series of advanced safety and
driver support
systems which make use of detection devices such as the forward sensing camera
(FSC) and
radar sensors.
SEE MORE:
MASS AIR FLOW (MAF)/INTAKE AIR TEMPERATURE (IAT) SENSOR
REMOVAL/INSTALLATION
CAUTION:
Neither the MAF nor the IAT sensor cannot be removed as a single unit.
When
replacing the MAF or IAT sensor, replace it together with the other sensor
as a single
unit.
1. Disconnect the negative battery
FUEL TANK REMOVAL/INSTALLATION
WARNING:
Repairing a fuel tank containing fuel is dangerous. Explosion or fire
may cause death or serious
injury. Always properly steam clean a fuel tank before repairing it.
Fuel line spills and leakage are dangerous. Fuel can ignite and cause
serious injuries
© 2016-2021 Copyright www.m2info.net