Mazda 2: Foreword

Mazda 2. FOREWORD

*: Malfunction Indicator Lamp (MIL), Generator Warning Light, Security Light

OBD-II PENDING TROUBLE CODE

OBD-II FREEZE FRAME DATA

OBD-II ON-BOARD SYSTEM READINESS TEST

OBD-II READ/CLEAR DIAGNOSTIC TEST RESULTS

OBD-II PARAMETER IDENTIFICATION (PID) ACCESS

READ NEXT:

 On-Board Diagnostic Test

DTC Reading Procedure 1. Connect the M-MDS (IDS) to the DLC-2. 2. After the vehicle is identified, select the following items from the initialization screen of the IDS. Select "Self Test". Select

 OBD-II Drive Mode

Using the OBD-II Drive Mode, the monitoring item requested by OBD-II regulations can be easily diagnosed. Performing the Drive Mode inspects the OBD-II system for proper operation and must be p

 DTC Table

SEE MORE:

 Center Ventilator Grille

CENTER VENTILATOR GRILLE REMOVAL/INSTALLATION Removal 1. Route the wiring harness as shown in the figure and pull on the center ventilator grille in the direction of the arrow to remove it. Installation NOTE: The center ventilator grille service part is shipped with a center ventilator grille

 Foreword [Audio]

NOTE: Note down all radio programs set by the customer prior to the repairs. Reset all radio programs and adjust the time after the repairs. Troubleshooting Index Quick Diagnostic Chart (Entire Audio System) CONFIRMATION STEP 1: AUDIO SWITCH CONFIRMATION Verify the customer complaint and i

© 2016-2022 Copyright www.m2info.net