Mazda 2: Emergency Operation for Starting the Engine

Mazda2 DJ 2014–2021 Owners Manual / When Driving / Start/Stop Engine / Starting the Engine / Emergency Operation for Starting the Engine

If the KEY warning light (red) illuminates, or the push button start indicator light (amber) fl ashes, this could indicate that the engine may not start using the usual starting method. Have your vehicle inspected at an expert repairer, we recommend an Authorised Mazda Repairer as soon as possible. If this occurs, the engine can be force-started. Press and hold the push button start until the engine starts.

Other procedures necessary for starting the engine such as having the key in the cabin, and depressing the clutch pedal (manual transaxle) or the brake pedal (automatic transaxle) are required.

READ NEXT:

 Turning the Engine Off

WARNING Do not stop the engine while the vehicle is moving: Stopping the engine while the vehicle is moving for any reason other than in an emergency is dangerous. Stopping the engine while the

 i-stop

The i-stop function automatically stops the engine when the vehicle is stopped at a traffi c light or stuck in traffi c, and then restarts the engine automatically to resume driving. The system

 Instrument Cluster and Display

SEE MORE:

 On-Board Diagnostic Test

DTC Reading Procedure 1. Connect the M-MDS (IDS) to the DLC-2. 2. After the vehicle is identified, select the following items from the initialization screen of the IDS. Select "Self Test". Select "Modules". Select "PCM". 3. Then, select the "Retrieve CMDTCs" and perform procedures according t

 Purge Solenoid Valve

PURGE SOLENOID VALVE REMOVAL/INSTALLATION 1. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION). CAUTION: Removing the fresh-air duct from the air cleaner case may damage the fresh-air duct. Always remove the fresh-air duct and the air cleaner case as a single unit. 2.

© 2016-2021 Copyright www.m2info.net