Mazda 2: DTC B1126:11/B1126:12/B1126:13/B1126:19/B1126:1A
Mazda 2 2007-2014 Service Manual / Restraints / DTC / DTC B1126:11/B1126:12/B1126:13/B1126:19/B1126:1A
System Malfunction Location
Detection Condition
WARNING:
- Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection according to only the detection conditions may cause injury due to an operating error, or damage the system. When performing an inspection, always follow the inspection procedure.
- Resistance other than 1.54-8.27 ohms is detected in driver-side side air bag module circuit
- Wiring harness between the driver-side side air bag module and SAS control module has a malfunction.
Possible Causes
- Driver-side side air bag module connector malfunction
- Open or short circuit in the wiring harness between the driver-side side air bag module and SAS control module
- Driver-side side air bag module malfunction
- SAS control module malfunction
System Wiring Diagram
Diagnostic Procedure
DTC B1126:55/B1127:55
System Malfunction Location
Detection Condition
WARNING:
- Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection according to only the detection conditions may cause injury due to an operating error, or damage the system. When performing an inspection, always follow the inspection procedure.
- SAS control module configuration setting has not been done correctly
Possible Causes
- SAS control module configuration setting not implemented
- SAS control module configuration setting invalid
- SAS control module malfunction
Diagnostic Procedure
READ NEXT:
DTC B1127:11/B1127:12/B1127:13/B1127:19/B1127:1A
System Malfunction Location
Detection Condition
WARNING:
Detection conditions are for understanding the DTC outline before
performing an
inspection. Performing an inspection according to only th
DTC B1128:11/B1128:12/B1128:13/B1128:19/B1128:1A
System Malfunction Location
Detection Condition
WARNING:
Detection conditions are for understanding the DTC outline before
performing an
inspection. Performing an inspection according to only th
DTC B1129:11/B1129:12/B1129:13/B1129:19/B1129:1A
System Malfunction Location
Detection Condition
WARNING:
Detection conditions are for understanding the DTC outline before
performing an
inspection. Performing an inspection according to only th
SEE MORE:
Fuel Pump Unit
FUEL PUMP UNIT REMOVAL/INSTALLATION
WARNING:
Fuel is very flammable liquid. If fuel spills or leaks from the
pressurized fuel system, it
will cause serious injury or death and facility breakage. Fuel can also
irritate skin and
eyes. To prevent this, always complete the "Fuel Line Safety Proc
Forward Sensing Camera (FSC)
Your vehicle is equipped with a Forward Sensing Camera (FSC). The Forward
Sensing
Camera (FSC) is positioned near the rearview mirror and used by the following
systems.
High Beam Control System (HBC)
Lane Departure Warning System (LDWS)
The Forward Sensing Camera (FSC) determines t
© 2016-2021 Copyright www.m2info.net