Mazda 2: DTC B10FD:11/B10FD:13/B10FD:87/B10FD:96
System Malfunction Location

Detection Condition
WARNING:
- Detection conditions are for understanding the DTC outline before
performing an
inspection. Performing an inspection according to only the detection
conditions may
cause injury due to an operating error, or damage the system. When
performing an
inspection, always follow the inspection procedure.
- Wiring harness between the driver-side side air bag sensor and SAS
control module has
a malfunction.
- Driver-side side air bag sensor has a malfunction.
Possible Causes
- Driver-side side air bag sensor connector malfunction
- Open or short circuit in the wiring harness between the driver-side side
air bag sensor
and SAS control module
- Driver-side side air bag sensor malfunction
- SAS control module malfunction
System Wiring Diagram

Diagnostic Procedure




DTC B10FD:55/B10FE:55
System Malfunction Location

Detection Condition
WARNING:
- Detection conditions are for understanding the DTC outline before
performing an
inspection. Performing an inspection according to only the detection
conditions may
cause injury due to an operating error, or damage the system. When
performing an
inspection, always follow the inspection procedure.
- SAS control module configuration setting has not been done correctly
Possible Causes
- SAS control module configuration setting not implemented
- SAS control module configuration setting invalid
- SAS control module malfunction
Diagnostic Procedure


READ NEXT:
System Malfunction Location
Detection Condition
WARNING:
Detection conditions are for understanding the DTC outline before
performing an
inspection. Performing an inspection according to only th
System Malfunction Location
Detection Condition
WARNING:
Detection conditions are for understanding the DTC outline before
performing an
inspection. Performing an inspection according to only th
System Malfunction Location
Detection Condition
WARNING:
Detection conditions are for understanding the DTC outline before
performing an
inspection. Performing an inspection according to only th
SEE MORE:
Pre-Delivery Inspection Table
Exterior
INSPECT and ADJUST, if necessary, the following items to specification:
Glass, exterior bright metal and paint for damage
Wheel lug nuts
All weatherstrips for damage or detachment
Tire pressures
Headlight cleaner and fluid level (if equipped)
Operation o
Mazda strongly urges the use of child-restraint systems for children small
enough to use
them.
Mazda recommends use of a Mazda genuine child-restraint system or one that
complies with
the UNECE *1 44 regulation. If you would like to purchase a Mazda genuine
child-restraint
system, please
© 2016-2021 Copyright www.m2info.net