Mazda 2: DTC B00B5:11/B00B5:12/B00B5:13/B00B5:1D
System Malfunction Location

Detection Condition
WARNING:
- Detection conditions are for understanding the DTC outline before
performing an
inspection. Performing an inspection according to only the detection
conditions may cause
injury due to an operating error, or damage the system. When performing an
inspection,
always follow the inspection procedure.
- Malfunction in seat track position sensor circuit.
Possible Causes
- Seat track position sensor connector malfunction
- Malfunction of connector between seat track position sensor and SAS
control module.
- Open or short circuit or short to ground or short to power supply in
wiring harness
between seat track position sensor and SAS control module.
- Seat track position sensor malfunction
- SAS control module malfunction
System Wiring Diagram

Diagnostic Procedure


DTC B00B5:55
System Malfunction Location
- Configuration setting error (seat track position sensor structural
malfunction)
Detection Condition
WARNING:
- Detection conditions are for understanding the DTC outline before
performing an
inspection. Performing an inspection according to only the detection
conditions may
cause injury due to an operating error, or damage the system. When
performing an
inspection, always follow the inspection procedure.
- SAS control module configuration setting has not been done correctly
Possible Causes
- SAS control module configuration setting not implemented
- SAS control module configuration setting invalid
- SAS control module malfunction
Diagnostic Procedure


DTC B00C0:93
System Malfunction Location
- Seat weight sensor (FL) communication error
Detection Condition
WARNING:
- Detection conditions are for understanding the DTC outline before
performing an inspection. Performing an inspection
according to only the detection conditions may cause injury due to an
operating error, or damage the system. When
performing an inspection, always follow the inspection procedure.
- Seat weight sensor malfunction is detected
Possible Causes
- Seat weight sensor connector malfunction
- Seat weight sensor control module connector malfunction
- Open circuit or short to ground or short to power supply in wiring
harness between seat weight sensor control module and seat
weight sensor
- Seat weight sensor malfunction
- Seat weight sensor control module malfunction
- SAS control module malfunction
System Wiring Diagram

Diagnostic Procedure


DTC B00C1:93
System Malfunction Location
- Seat weight sensor (RL) communication error
Detection Condition
WARNING:
- Detection conditions are for understanding the DTC outline before
performing an inspection. Performing an inspection
according to only the detection conditions may cause injury due to an
operating error, or damage the system. When
performing an inspection, always follow the inspection procedure.
- Seat weight sensor (RL) malfunction is detected
Possible Causes
- Seat weight sensor (RL) connector malfunction
- Seat weight sensor control module connector malfunction
- Open circuit or short to ground or short to power supply in wiring
harness between seat weight sensor control module and seat
weight sensor (RL)
- Seat weight sensor (RL) malfunction
- Seat weight sensor control module malfunction
- SAS control module malfunction
System Wiring Diagram

Diagnostic Procedure


DTC B00C2:93
System Malfunction Location
- Seat weight sensor (FR) communication error
Detection Condition
WARNING:
- Detection conditions are for understanding the DTC outline before
performing an inspection. Performing an inspection
according to only the detection conditions may cause injury due to an
operating error, or damage the system. When
performing an inspection, always follow the inspection procedure.
- Seat weight sensor (FR) malfunction is detected
Possible Causes
- Seat weight sensor (FR) connector malfunction
- Seat weight sensor control module connector malfunction
- Open circuit or short to ground or short to power supply in wiring
harness between seat weight sensor control module and seat
weight sensor (FR)
- Seat weight sensor (FR) malfunction
- Seat weight sensor control module malfunction
- SAS control module malfunction
System Wiring Diagram

Diagnostic Procedure


DTC B00C3:93
System Malfunction Location
- Seat weight sensor (RR) communication error
Detection Condition
WARNING:
- Detection conditions are for understanding the DTC outline before
performing an inspection. Performing an inspection
according to only the detection conditions may cause injury due to an
operating error, or damage the system. When
performing an inspection, always follow the inspection procedure.
- Seat weight sensor (RR) malfunction is detected
Possible Causes
- Seat weight sensor (RR) connector malfunction
- Seat weight sensor control module connector malfunction
- Open circuit or short to ground or short to power supply in wiring
harness between seat weight sensor control module and seat
weight sensor (RR)
- Seat weight sensor (RR) malfunction
- Seat weight sensor control module malfunction
- SAS control module malfunction
System Wiring Diagram

Diagnostic Procedure


DTC B00D2:01
System Malfunction Location
- Air bag system warning light malfunction
Detection Condition
WARNING:
- Detection conditions are for understanding the DTC outline before
performing an
inspection. Performing an inspection according to only the detection
conditions may
cause injury due to an operating error, or damage the system. When
performing an
inspection, always follow the inspection procedure.
- Air bag system warning light malfunction detected
Possible Causes
- Instrument cluster assembly incorrect
- Instrument cluster malfunction
- SAS control module malfunction
Diagnostic Procedure


DTC B00D2:29
System Malfunction Location
- Invalid signal to air bag system warning light
Detection Condition
WARNING:
- Detection conditions are for understanding the DTC outline before
performing an
inspection. Performing an inspection according to only the detection
conditions may
cause injury due to an operating error, or damage the system. When
performing an
inspection, always follow the inspection procedure.
- Air bag system warning light illumination request sent from SAS control
module does
not correspond to air bag system warning light illumination status in
instrument cluster
Possible Causes
- Air bag system warning light malfunction
Diagnostic Procedure

READ NEXT:
System Malfunction Location
Detection Condition
WARNING:
Detection conditions are for understanding the DTC outline before
performing an
inspection. Performing an inspection according to only th
System Malfunction Location
Detection Condition
WARNING:
Detection conditions are for understanding the DTC outline before
performing an
inspection. Performing an inspection according to only th
System Malfunction Location
Detection Condition
WARNING:
Detection conditions are for understanding the DTC outline before
performing an
inspection. Performing an inspection according to only th
SEE MORE:
Before driving, adjust the inside and
outside mirrors.
Outside Mirrors
WARNING
Be sure to look over your shoulder
before changing lanes:
Changing lanes without taking
into account the actual distance of
the vehicle in the convex mirror is
dangerous. You could have a serious
accident. What
Embedded Type *
The aerial is embedded into the window
glass.
CAUTION
When washing the inside of the window
which has an aerial, use a soft cloth
dampened in lukewarm water, gently
wiping the aerial lines.
Use of glass cleaning products could
damage the aerial.
Detachable Type
To remove
© 2016-2022 Copyright www.m2info.net
