Mazda 2: DTC B00A0:81/B00A0:87/B00A0:8F
System Malfunction Location
Detection Condition
WARNING:
- Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection according to only the detection conditions may cause injury due to an operating error, or damage the system. When performing an inspection, always follow the inspection procedure.
- Error signal is detected between SAS control module and seat weight sensor control module
Possible Causes
- Seat weight sensor connector malfunction
- Open circuit in wiring harness between seat weight sensor control module and SAS control module
- Short to power supply in wiring harness between the SAS control module and seat weight sensor control module
- Short to ground in wiring harness between the SAS control module and seat weight sensor control module
- Seat weight sensor control module malfunction
- SAS control module malfunction
System Wiring Diagram
Diagnostic Procedure
READ NEXT:
DTC B00B5:11/B00B5:12/B00B5:13/B00B5:1D
System Malfunction Location
Detection Condition
WARNING:
Detection conditions are for understanding the DTC outline before
performing an
inspection. Performing an inspection according to only th
DTC B00D5:11/B00D5:12
System Malfunction Location
Detection Condition
WARNING:
Detection conditions are for understanding the DTC outline before
performing an
inspection. Performing an inspection according to only th
DTC B10FD:11/B10FD:13/B10FD:87/B10FD:96
System Malfunction Location
Detection Condition
WARNING:
Detection conditions are for understanding the DTC outline before
performing an
inspection. Performing an inspection according to only th
SEE MORE:
DTC Display
NOTE:
If the self-test is implemented, the seat weight sensor calibration is
performed. Perform
the DTC inspection in accordance with the following conditions:
Do not place objects on the front seat (passenger side)
Do not touch the front seat (passenger side)
Fix the slide position of th
i-stop
The i-stop function automatically stops the engine when the vehicle is
stopped at a traffi c
light or stuck in traffi c, and then restarts the engine automatically to resume
driving. The
system provides improved fuel economy, reduced exhaust gas emissions, and
eliminates
idling noise while
© 2016-2021 Copyright www.m2info.net