Mazda 2: DTC B0094:11/B0094:13/B0094:87/B0094:96
System Malfunction Location
Detection Condition
WARNING:
- Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection according to only the detection conditions may cause injury due to an operating error, or damage the system. When performing an inspection, always follow the inspection procedure.
- Malfunction in the wiring harness between the crash zone sensor and SAS control module
- Malfunction in the crash zone sensor circuit
Possible Causes
- Crash zone sensor connector malfunction
- Open or short circuit or short to ground or short to power supply in the wiring harness between the crash zone sensor and SAS control module
- Crash zone sensor malfunction
- SAS control module malfunction
System Wiring Diagram
Diagnostic Procedure
DTC B0094:55
System Malfunction Location
- Configuration setting error (crash zone sensor structural malfunction)
Detection Condition
WARNING:
- Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection according to only the detection conditions may cause injury due to an operating error, or damage the system. When performing an inspection, always follow the inspection procedure.
- SAS control module configuration setting has not been done correctly
Possible Causes
- SAS control module configuration setting not implemented
- SAS control module configuration setting invalid
- The crash zone sensor is installed incorrectly or the incorrect sensor is installed.
- SAS control module malfunction
Diagnostic Procedure
READ NEXT:
DTC B00A0:07
System Malfunction Location
Seat weight sensor collision detection
Detection Condition
WARNING:
Detection conditions are for understanding the DTC outline before
performing an
inspection. Perf
DTC B00A0:1C
System Malfunction Location
Seat weight sensor control module circuit open to power supply
Detection Condition
WARNING:
Detection conditions are for understanding the DTC outline before
perform
DTC B00A0:81/B00A0:87/B00A0:8F
System Malfunction Location
Detection Condition
WARNING:
Detection conditions are for understanding the DTC outline before
performing an inspection. Performing an
inspection according to only th
SEE MORE:
DTC Display
NOTE:
If the self-test is implemented, the seat weight sensor calibration is
performed. Perform
the DTC inspection in accordance with the following conditions:
Do not place objects on the front seat (passenger side)
Do not touch the front seat (passenger side)
Fix the slide position of th
Vehicle Speed Sensor (VSS)
VEHICLE SPEED SENSOR (VSS) INSPECTION
CAUTION:
Water or foreign objects entering the connector can cause a poor
connection or
corrosion. Be sure not to drop water or foreign objects on the connector
when
disconnecting it.
On-Vehicle Inspection
1. Inspect the power supply circuit for the VSS
© 2016-2021 Copyright www.m2info.net