Mazda 2: DTC B0010:11/B0010:12/B0010:13/B0010:19/B0010:1A
System Malfunction Location

Detection Condition
WARNING:
- Detection conditions are for understanding the DTC outline before
performing an
inspection. Performing an inspection according to only the detection
conditions may
cause injury due to an operating error, or damage the system. When
performing an
inspection, always follow the inspection procedure.
- Resistance other than 1.54-5.06 ohms detected in passenger-side air bag
module
(inflator No.1) circuit
- Wiring harness between passenger-side air bag module (inflator No.1) and
SAS control
module has malfunction
Possible Causes
- Passenger-side air bag module (inflator No.1) connector malfunction
- Open or short circuit the wiring harness between the passenger-side air
bag module (inflator No.1) and the SAS control module
- Passenger-side air bag module malfunction
- SAS control module malfunction
System Wiring Diagram

Diagnostic Procedure




READ NEXT:
System Malfunction Location
Detection Condition
WARNING:
Detection conditions are for understanding the DTC outline before
performing an
inspection. Performing an inspection according to only th
System Malfunction Location
Detection Condition
WARNING:
Detection conditions are for understanding the DTC outline before
performing an inspection. Performing an
inspection according to only th
System Malfunction Location
Detection Condition
WARNING:
Detection conditions are for understanding the DTC outline before
performing an
inspection. Performing an inspection according to only th
SEE MORE:
QUICK RELEASE CONNECTOR REMOVAL/INSTALLATION
WARNING:
Fuel is very flammable liquid. If fuel spills or leaks from the
pressurized fuel system, it
will cause serious injury or death and facility breakage. Fuel can also
irritate skin and
eyes. To prevent this, always complete the "Fuel Line Sa
Inspecting Coolant Level
WARNING
Do not use a match or live fl ame in the
engine compartment. DO NOT ADD
COOLANT WHEN THE ENGINE IS
HOT:
A hot engine is dangerous. If the
engine has been running, parts of the
engine compartment can become very
hot. You could be burned. Carefully
inspect th
© 2016-2021 Copyright www.m2info.net