Mazda 2: Driving In Flooded Area
WARNING
Dry off brakes that have become wet by driving slowly, releasing the accelerator pedal and lightly applying the brakes several times until the brake performance returns to normal: Driving with wet brakes is dangerous.
Increased stopping distance or the vehicle pulling to one side when braking could result in a serious accident. Light braking will indicate whether the brakes have been affected.
CAUTION
Do not drive the vehicle on fl ooded roads as it could cause short circuiting of electrical/electronic parts, or engine damage or stalling from water absorption. If the vehicle has been immersed in water, consult an expert repairer, we recommend an Authorised Mazda Repairer.
READ NEXT:
Turbocharger Information (SKYACTIV-D 1.5)
CAUTION
After driving at freeway speeds or up a long hill, idle the
engine at least 30 seconds
before stopping it. Otherwise, the turbocharger could be damaged. However,
when
i-stop oper
Towing
Towing Caravans and Trailers
(Europe/Russia/Turkey/Israel/South Africa)
Your Mazda was designed and built primarily to carry passengers and cargo.
If you tow a trailer, follow these instructions
When Driving
Information concerning safe driving and stopping.
SEE MORE:
Dashboard
DASHBOARD REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the following parts:
Glove compartment (See GLOVE COMPARTMENT REMOVAL/INSTALLATION).
Dashboard under cover (See DASHBOARD UNDER COVER REMOVAL/INSTALLATION).
Heat duct (passenger side) (See HEAT DUCT COMPONENT
R
Engine Coolant Temperature (ECT) Sensor
ENGINE COOLANT TEMPERATURE (ECT) SENSOR REMOVAL/INSTALLATION
WARNING:
When the engine is hot, it can badly burn. Turn off the engine and wait
until it is cool
before removing the ECT sensor.
ECT Sensor No.1 Removal/Installation
1. Disconnect the negative battery cable.
2. Drain the engine coo
© 2016-2021 Copyright www.m2info.net