Mazda 2: Diagnostic Assist Function [Audio]

Mazda 2 2007-2014 Service Manual / Body and Accessories / Diagnostic Assist Function [Audio]

LCD Inspection

1. Turn the ignition switch to the ACC or ON position.

2. Turn the center panel unit power to on.

3. While pressing the POWER/VOLUME switch, simultaneously press the TUNE/TRACK UP switch for 0.5 s or more.

Mazda 2. DIAGNOSTIC ASSIST FUNCTION

4. Inspect according to the following table:

Mazda 2. DIAGNOSTIC ASSIST FUNCTION

5. Cancel the diagnostic assist function by either turning off the center panel unit power or by turning the ignition switch to the LOCK position.

Switch Inspection

1. Turn the ignition switch to the ACC or ON position.

2. Turn the center panel unit power to on.

3. While pressing the POWER/VOLUME switch, simultaneously press the Preset 3 switch for 0.5 s or more.

Mazda 2. DIAGNOSTIC ASSIST FUNCTION

4. Inspect according to the following table:

Mazda 2. DIAGNOSTIC ASSIST FUNCTION

5. Cancel the diagnostic assist function by either turning off the center panel unit power or by turning the ignition switch to the LOCK position.

Dial Switch Inspection

1. Switch the ignition to ACC or ON.

2. Turn the audio unit power to on.

3. While pressing the POWER/VOLUME switch, simultaneously press the CD/USB/AUX switch for 3 s or more.

Mazda 2. DIAGNOSTIC ASSIST FUNCTION

4. Inspect according to the following table:

Mazda 2. DIAGNOSTIC ASSIST FUNCTION

5. To stop the diagnostic assist function, ignition is switched to off or turning off the audio unit power.

Speaker Inspection

1. Turn the ignition switch to the ACC or ON position.

2. Turn the center panel unit power to on.

3. While pressing the POWER/VOLUME switch, simultaneously press the AUTO-M/CAT switch for 0.5 s or more.

Mazda 2. DIAGNOSTIC ASSIST FUNCTION

4. Inspect according to the following table:

Mazda 2. DIAGNOSTIC ASSIST FUNCTION

5. Cancel the diagnostic assist function by either turning off the center panel unit power or by turning the ignition switch to the LOCK position.

Radio Reception Condition Inspection

1. Turn the ignition switch to the ACC or ON position.

2. Turn the center panel unit power to on.

3. Tune in the radio.

4. While pressing the POWER/VOLUME switch, simultaneously press the Preset switch 2 for 0.5 s or more.

Mazda 2. DIAGNOSTIC ASSIST FUNCTION

5. Inspect according to the following table:

CAUTION:

Mazda 2. DIAGNOSTIC ASSIST FUNCTION

Mazda 2. DIAGNOSTIC ASSIST FUNCTION

6. Cancel the diagnostic assist function by either turning off the center panel unit power or by turning the ignition switch to the LOCK position.

Center panel specification inspection

1. Turn the ignition switch to the ACC or ON position.

2. Turn the center panel unit power to on.

3. While pressing the POWER/VOLUME switch, simultaneously press the Preset switch 6 for 3 s or more.

Mazda 2. DIAGNOSTIC ASSIST FUNCTION

4. Inspect according to the following table:

Mazda 2. DIAGNOSTIC ASSIST FUNCTION

Mazda 2. DIAGNOSTIC ASSIST FUNCTION

5. Cancel the diagnostic assist function by either turning off the center panel unit power or by turning the ignition switch to the LOCK position.

READ NEXT:

 Power Window System Wiring Diagram [Power Window System]

FOREWORD [POWER WINDOW SYSTEM] Troubleshooting Procedure Slightly shake the wiring harness and connectors while performing the inspection to discover whether poor contact points are the cause o

 Keyless Entry System Wiring Diagram [Keyless Entry System]

SYMPTOM TROUBLESHOOTING CHART [KEYLESS ENTRY SYSTEM] TROUBLESHOOTING INDEX [KEYLESS ENTRY SYSTEM] Refer to the general information and check the basic troubleshooting procedure. The keyless ent

 Symptom Troubleshooting [Instrument Cluster]

QUICK DIAGNOSTIC CHART [INSTRUMENT CLUSTER] NO. 1 FUEL GAUGE INDICATOR LIGHT INDICATION IS INCORRECT Diagnostic procedure NO. 2 ALL METERS AND GAUGES DO NOT OPERATE Diagnostic procedure NO. 3

SEE MORE:

 Brake Pedal

BRAKE PEDAL INSPECTION Pedal Height Inspection 1. Measure the distance from the steering shaft cover to the center of the upper surface of the pedal pad and verify that it is as specified. If not within the specification, replace the pedal component. Pedal height (reference value) 192 mm

 Clock Spring

CLOCK SPRING REMOVAL/INSTALLATION 1. Switch the ignition to off. 2. Disconnect the negative battery cable and wait for 1 min or more. 3. Remove the following parts: Driver-side air bag module (See DRIVER-SIDE AIR BAG MODULE REMOVAL/INSTALLATION). Steering wheel (See STEERING WHEEL AND COLUMN R

© 2016-2021 Copyright www.m2info.net