Mazda 2: Centre-Rear Position Seat Belt

Fastening the Seat Belt

  1. Pull the seat belt tongue to the desired length.
  2. Insert it into the seat belt buckle until you hear a click sound.

Centre-Rear Position Seat Belt


  1. Adjust the belt length.

    To lengthen the belt, hold the seat belt tongue at a right angle to the webbing and pull. To shorten, pull the loose end of the webbing.

Lengthen


Shorten


  1. Make sure the lap belt is snugly fi tted against your body.

Fastening the Seat Belt


WARNING

Wearing the Lap Belt: A lap belt worn too high is dangerous.

In a collision, this would concentrate the impact force directly on the abdominal area, causing serious injury.

Wear the lap belt snugly and as low as possible.

Unfastening the Seat Belt

Depress the button on the seat belt buckle.

Unfastening the Seat Belt


READ NEXT:

 Child Restraint

 Child-Restraint Precautions

Mazda strongly urges the use of child-restraint systems for children small enough to use them. Mazda recommends use of a Mazda genuine child-restraint system or one that complies with the UNE

 Child-Restraint System Installation

Categories of Child-Restraint Systems NOTE When purchasing, ask the manufacturer of the child-restraint system which type of childrestraint system is appropriate for your child and vehicle. (Eur

SEE MORE:

 Cruise Control

With cruise control, you can set and automatically maintain any speed of more than about 25 km/h (16 mph). WARNING Do not use the cruise control under the following conditions: Using the cruise control under the following conditions is dangerous and could result in loss of vehicle control.

 Fuel Tank Pressure Sensor

FUEL TANK PRESSURE SENSOR REMOVAL/INSTALLATION CAUTION: The fuel tank pressure sensor cannot be removed as a single unit. When replacing the fuel tank pressure sensor, replace it together with the evaporative hose component as a single unit. 1. Disconnect the negative battery cable. 2. Dis

© 2016-2021 Copyright www.m2info.net