Mazda 2: Aerial
Embedded Type *
The aerial is embedded into the window
glass.
CAUTION
When washing the inside of the window
which has an aerial, use a soft cloth
dampened in lukewarm water, gently
wiping the aerial lines.
Use of glass cleaning products could
damage the aerial.
Detachable Type
To remove the aerial, turn it anticlockwise.
To install the aerial, turn it clockwise.
Make sure the aerial is securely installed.

CAUTION
- To prevent damage to the aerial,
remove it before entering a car wash
facility or passing beneath a low
overhead clearance.
- Be careful around the aerial when
removing snow from the roof.
Otherwise the aerial could be
damaged.
NOTE
When leaving your vehicle unattended,
we recommend that you remove the
aerial and store it inside the vehicle.
READ NEXT:
WARNING
Always adjust the audio while the
vehicle is stopped:
Do not adjust the audio control
switches while driving the vehicle.
Adjusting the audio while driving
the vehicle is dangerous as
Power/Volume/Sound Controls
Clock
Operating the Radio (Type A)
Operating the Radio (Type B)
Operating the Compact Disc (CD) Player
How to use Auxiliary jack/USB port
Error Indicatio
NOTE
The explanation of functions described in this manual may differ from the
actual
operation, and the shapes of screens and buttons and the letters and characters
displayed may also differ fro
SEE MORE:
Door-lock knob
Turn and lane-change signal
Lighting control
Wiper and washer lever
DSC OFF switch
Tyre pressure monitoring system set switch
i-stop OFF switch
Headlight Levelling switch
LDWS switch
SCBS OFF switch
Outside mirror switch
Power window lock switch
Power wi
KNOCK SENSOR (KS) REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the intake manifold. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION).
3. Disconnect the KS connector.
4. Remove the KS using the SST
5. Install in the reverse order of removal.
KNOCK SENSOR (KS) INSPECTION
1.
© 2016-2022 Copyright www.m2info.net
