Mazda 2: Active Driving Display Does Not
Operate
If the Active Driving Display does not
operate
If the active driving display does not
operate, switch the ignition off and
then restart the engine. If the active
driving display does not operate even
with the engine restarted, have the
vehicle inspected at an expert repairer,
we recommend an Authorised Mazda
Repairer.
READ NEXT:
Important consumer information including warranties and add-on equipment.
Registering your vehicle in a foreign country may be problematic depending on
whether it
meets the specifi c emission and safety standards of the country in which the
vehicle will be
driven. Con
SEE MORE:
HEATED OXYGEN SENSOR (HO2S) REMOVAL/INSTALLATION
WARNING:
A hot engine and exhaust system can cause severe burns. Turn off the
engine and wait
until they are cool before removing the exhaust system.
1. Disconnect the negative battery cable.
2. Remove the air cleaner cover. (See INTAKE-AIR SYS
BRAKE SWITCH INSPECTION
CAUTION:
Inspect the brake switch with it installed to the brake pedal, otherwise
the brake switch
may not operate normally after inspection. If the brake switch is removed
from the
brake pedal, replace the brake switch with a new one.
1. Verify that the continuity i
© 2016-2021 Copyright www.m2info.net