Mazda 2: Active Driving Display

Active Driving Display


WARNING

Always adjust the display brightness and position with the vehicle stopped: Adjusting the display brightness and position while driving the vehicle is dangerous as doing so could distract your attention from the road ahead and lead to an accident.

CAUTION

NOTE

The active driving display indicates the following information:

Each setting/adjustment for the active driving display can be performed on the centre display (Type C/Type D audio).

  1. Select the icon on the home
    screen and display the Settings screen.
  2. Select the AD-Disp tab.
  3. Select the desired item and perform the setting/adjustment.

READ NEXT:

 Warning/Indicator Lights

Instrument Cluster varies depending on model and specifi cations. Warning/Indicator lights will appear in any of the highlighted areas Warning Lights These lights turn on or fl ash to notify th

 Transaxle

 Manual Transaxle Operation

Manual Transaxle Shift Pattern The vehicle is equipped with either a 5-speed or 6-speed manual transaxle. The shift pattern for each is shown above. Depress the clutch pedal all the way down

SEE MORE:

 OBD-II Drive Mode

Using the OBD-II Drive Mode, the monitoring item requested by OBD-II regulations can be easily diagnosed. Performing the Drive Mode inspects the OBD-II system for proper operation and must be performed to ensure that no additional DTCs are present. The OBD-II Drive Mode is divided into the

 Blind Spot Monitoring (BSM) System

The Blind Spot Monitoring (BSM) system is designed to assist the driver in checking the area to the rear of the vehicle on both sides during lane changes by alerting the driver to the presence of vehicles approaching from the rear in an adjacent lane. The Blind Spot Monitoring (BSM) system

© 2016-2022 Copyright www.m2info.net