Mazda 2: ABS/TCS/DSC

READ NEXT:

 Antilock Brake System (ABS)

The ABS control unit continuously monitors the speed of each wheel. If one wheel is about to lock up, the ABS responds by automatically releasing and reapplying that wheel's brake. The driver w

 Traction Control System (TCS)

The Traction Control System (TCS) enhances traction and safety by controlling engine torque and braking. When the TCS detects driving wheel slippage, it lowers engine torque and operates the brake

 Dynamic Stability Control (DSC)

The Dynamic Stability Control (DSC) automatically controls braking and engine torque in conjunction with systems such as ABS and TCS to help control side slip when driving on slippery surfaces, or

SEE MORE:

 Air Fuel Ratio (A/F) Sensor

AIR FUEL RATIO (A/F) SENSOR REMOVAL/INSTALLATION WARNING: A hot engine and exhaust system can cause severe burns. Turn off the engine and wait until they are cool before removing the exhaust system. 1. Disconnect the negative battery cable. 2. Remove the air cleaner cover. (See INTAKE-AIR SYS

 Jacking Positions, Vehicle Lift (2 Supports) and Safety Stand (Rigid Rack) Positions

Jacking Positions WARNING: Improperly jacking a vehicle is dangerous. The vehicle can slip off the jack and cause serious injury. Use only the correct front and rear jacking points and block the wheels. Use safety stands to support the vehicle after it has been lifted. Front NOTE: To preven

© 2016-2021 Copyright www.m2info.net